External aluminium surfaces of windows and doors should be washed with clean water and a mild detergent at least every three months. A soft sponge or similar should be used to avoid scratching the glass or aluminium.
In coastal or industrial areas where the environmental
conditions are more demanding, the cleaning program should be carried out on a monthly basis.
Abrasive, chemical cleaners or steel wool should not be used as such methods may result in damage to the glass or aluminium surfaces.
Flyscreens can be cleaned by vacuuming or washing thoroughly using a soft brush.
Opening sashes should be operated on a regular basis
to ensure the sash hardware continues to move smoothly.
Awning/Casement Windows & French Doors
With sashes open, the sash and opening perimeter should be cleaned regularly and kept clear of dust and foreign matter. Drainage holes should be checked regularly to ensure they have not become blocked.
All door and window operating hardware should be cleaned and operated regularly to ensure smooth operation.
Lubricants should not be used on casement stays, as this will affect their operation.
Sliding Windows & Sliding Doors
Sill recesses should be regularly cleaned and kept
clear of dust and foreign matter. A brush and vacuum within the track area may be used to do this.
Drainage slots should be checked on a regular basis to ensure they have not become blocked with residual dirt or grime, to allow maximum drainage.
After cleaning, a light silicon spray may be applied to the track and woolpile seals to ensure quiet and smooth operation of the sash.
Door locks should be checked from time to time for satisfactory operation and may require adjustment to compensate for building settlement.
Door rollers are factory set and should not require any adjustment. If however, due to building settlement an adjustment needs to be made, the door panel must first be lifted to relieve weight from the roller assembly. Adjustment should be made using a cross recess head screwdriver.
Double Hung Windows
Window jamb tracks should be cleaned regularly and
kept clear of dust and foreign matter. Window operating
hardware should be cleaned and operated regularly to
ensure smooth operation.
Glass
It is recommended that all glass surfaces be kept clean
by prompt removal of all dirt or other contaminants.
Clean water and in some instances the addition of a
small amount of mild detergent should be used. After
washing, any detergent residue must be thoroughly
rinsed away with clean water. Under no circumstances
is any form of abrasive cleaner to be used. Stubborn
dirt or residue should be lightly sponged off to avoid
scratching of the glass.
The frequency of cleaning required will depend on
environmental conditions such as proximity to the
ocean or industrial areas. As a general guide, glass
should be cleaned at least quarterly.
